I have been so busy getting ready for the wedding and moving into our new house that I've totally neglected the blog!! Today I want to share a gift that I made for a one of our couple friends that got married at the beginning of June. I found this idea on Pinterest here. Let me just start by saying that this craft was a lot easier than I expected it to be!! I etched their last name into the glass for a practical casserole dish they could take to parties and ensure they would get back.
For this craft I needed:
- My cricut
- Etching cream (Hobby Lobby)
- A timer
- Brushes that can be tossed or a plastic knife
- Rubber Gloves
I started by going through my Cricut cartridges and finding a font that I liked. I chose the font from Winter Wonderland and the heart shapes from Playtime. The Cricut is actually pretty awesome because you can leave it on while switching in between cartridges so that you don't have to readjust the blade and try to get everything perfectly lined up in between cartridges. I attached the vinyl to the cutting mat and begin cutting.
Since I had three different sized glass dishes I used different font sizes. I did 1 1/2", 1 1/4' and 1". Then I took the cutouts off of the cutting mat and began to place them on the glass dishes. The beauty of this vinyl is that it's sticky so all you have to do is place it where you want it. I used the outline of the letters and placed them evenly in the middle of each dish and then I took the insides of the 'Q' and the Hearts and placed them where I wanted them. Make sure that there are no bubbles around the lettering otherwise the etching cream will get underneath and you won't have a clean etch.Then I used the etching cream to etch each glass dish one at a time. Please remember that etching cream is dangerous and can really hurt you, use some form of protection on your hands as you are doing this project. There are also warnings on the etching cream that you can look at. I ended up using a plastic knife to spread the etching cream over the vinyl cutout, make sure the cream doesn't run over the edges or you will etch the outside of the cutout. The blog I was looking at said to leave the etching cream on for 15 minutes, so after 15 minutes I went to wash of the cream, I did not like how light the etching turned out so I put the etching cream back on and did another 15 minutes.
To get the etching cream off I let the water in the sink run until it was warm to hot and used some dish soap, then while wearing my rubber gloves I began cleaning off the etching cream by rubbing my fingers off of the vinyl. It came off very easily and then all I had to do was peel off the vinyl and dry the dish. Here is the first dish I completed! I absolutely love it!!
Here are all three dishes completed! Aren't they fabulous! I am honestly surprised how easy these were to craft!
After completing this craft, I've thought of so many other things to etch!! I can't wait to start and to share!!